Paris—Due to safety considerations and a complex manufacturing process, the quality control of helicopter rotor blades demands 100% inspection. Helicopter manufacturer Eurocopter uses shearography, a laser technique based on speckle interferometry, to check its helicopter rotor blades. At Eurocopter's testing facility in Paris, the blades are put inside a vacuum chamber where they are subjected to a slight vacuum of 50 mbars. Shearography equipment and the Windows-based ISTRA program, both supplied by Dr. Ettemeyer GmbH (Neu Ulm, Germany), compare the shape of the blade under negative pressure conditions with blade shape under normal atmospheric pressure. The software analyzes changes between the two states to deliver a "good/bad" quality assessment. To do this, the interference pattern from the laser images is converted into strain measurements.
Necessary equipment includes two shearography cameras that measure blade surface deformation under the partial vacuum conditions. The cameras can observe an area of 600×800 mm on each side of the blade. Green laser light from a 5W NdYAG laser is coupled into two glass-fiber cables and guided to the shearography cameras. A diffuser system expands the laser beam to provide homogeneous laser illumination of the whole measuring field.
Blades to be inspected are loaded onto a slide that transports each blade into the vacuum chamber. The ISTRA program, running on a PC, automatically controls positioning of the shearography cameras, pressure inside the chamber, and evaluation of the results. Apart from the automatic inspection mode, there are blade definition and teaching modes for setting up. The system can detect defects as small as 2×2 mm, as well as shape changes over an area up to 10×10 mm.
Philippe Gaignard, Technical Quality Manager at Eurocopter France, says that the system has significantly reduced blade inspection times. "With the previous holographic technique, we needed about an hour for a medium sized blade. Now we can do it in just ten minutes."
JUNE 26TH WEBCAST: Collaborative Requirements Engineering
Speed your innovation. Capture the "voice of the customer" and translate customer requests into user requirements that define new products. Find out why the new ENOVIA Requirements Management solution enables organizations to improve their overall global requirements management process. Read More
Mechatronics in action
Successful synergistic integration of controls, electronics, computers and mechanical systems is key to the 21st century design process. Unlock the secrets at the Mechatronics Zone!
Webcast: Sensor Know-How Now
Join our moderator Randy Frank and John Keating from Cognex and explore Solving Industrial Inspection Problems. Read More
Engineering Concept Conduit
Engineering Concept Conduit looks at new products and the components that make them exceptional. Each month we’ll look at a new electronic product and see what makes it tick from an engineering point of view. We’ll explore the design and engineering challenges for the product and examine the components that solved those challenges.
Light Matters: Systems Level Approach to HBLED illumination applications
Its good practice to apply a systems-level approach to high-brightness LED (HBLED) illumination applications. Minimally, the system includes the optical, thermal and electrical characteristics of the of the HBLED, the lens (if any) which is built-in to its package, secondary optics such as external plastic lenses/reflectors to direct the light as your application requires and power driver electronics. Read More