Skip navigation
Electronics Industry Search
Advertisement
Email
Print
Reprints/License
RSS

GA aircraft get a black box

By Mark Allan Gottschalk; Anna Allen -- Design News, September 6, 1998

Engineers at Payload Systems (Cambridge, MA) have teamed with Cambridge Arrow Instruments (Warren, VT) to deliver one aspect of commercial airplanes that general aviation aircraft have always lacked: the black box. Similar in principle to those the big guys carry, the self-contained flight data recorder saves information such as altitude, position, time, temperature, and orientation from the cockpit's controls/displays for use in flight instruction or accident investigation. The only problem: engineers at Payload Systems say there are no requirements for this type of device. "We're trying to come up with a realistic set of requirements for the planes that will benefit from this product," says Steve Sell, mechanical engineer at Payload. "We will be able to record cockpit voice and other parameters such as engine noise. We're basically going to retain and enhance the security features so the data that comes off the recorder will be secure and tamper proof." Information is saved to 1 X 1 X 1/8-inch-thick SanDisk (Sunnyvale, CA) flash cards which can be removed for review or archiving. The flight recorder box is located in the tail of the airplane and will accommodate two wire connections: one for power, and one for GPS. Upon completion, it should sell for less than $1,000, a price that Sell credits to the ever-increasing value in PC components. "You are getting a lot more for your dollar," he says. "You can buy a 386 or 486 board for $100 or less and it has a lot of capabilities." He began with an Intel 80386, and has since realized the advantages of a Windows CE machine, specifically for initial prototyping in real-time. Engineers are using Parametric Technology's (Waltham, MA) Pro/Engineer to design the physical structure of the recorder, and OrCAD (Beaverton, OR) for the PC-board layout. Automotive-airbag sensors and accelerometers from Motorola (Austin, TX) and Analog Devices (Norwood, MA) will be used to record information such as altitude. "The computer industry is evolving so much faster than the proposal cycles," comments Sell, "so it is highly likely that electronic components with even greater capabilities will be available during the development cycle, at a similar cost."

Advertisement

Sponsored Content

Technology Marketplace

Email
Print
Reprints/License
RSS
Find a supplier on oemsuppliersearch.com

Talkback
Advertisement
Reed Business Information Resource Center

Featured Company


Advertisement

Design News Partner Zones

Light Matters: The Unsung Heroes of Modern Health Care
First, let's define "no-compromise." In an ideal configuration, this lamp would use a high-brightness LED (HBLED) that is built into a small, integrated package and is able to produce a large quantity of focused light, operate with a high level of reliability and generate no audible noise. Is this difficult? Yes, but it is possible.
Read More


Design Engineers' Portal for Sensing and Machine Safety
Whatever industry you're in, or whatever product you manufacture, the right sensors to automate your plant, and to improve your overall efficiency, quality and safety are a must. You'll find Banner Engineering to be an amazing resource of products, training and people with expertise.


Test & Measurement World Machine Vision & Inspection Report
Topics include machine-vision software, Power over Camera Link, thermal imaging and frame grabbers. Read More

Design News Partner Zone Directory »

Please visit these other Reed Business sites