HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Features
Content posted in March 2011
<<  <  Page 3/3
Multi-Drop Sealed Connector and Cable System
Features 
3/4/2011  Post a comment
System is fully sealed and includes a modular assembly design for flexibility.
Vertical Entry, Lithium Coin Cell Holders
Features 
3/4/2011  Post a comment
For use with portable medical and other electronic devices.
Thermocouple Probes with M12 Molded Connectors
Features 
3/4/2011  Post a comment
Available with Type J, 316 stainless steel or Type K, Inconel 600 sheaths.
Integrated Magnetic Encoder
Features 
3/4/2011  Post a comment
Available on the 1 inch 25000 Series linear actuators.
Ethernet Licensed Radio
Features 
3/4/2011  Post a comment
Combines Ethernet and serial ports to suit a broad range of remote devices and RTUs.
AbrasiMatic 300 Abrasive Cutter
Features 
3/4/2011  Post a comment
Available with optional X-Bed, digital display to track X-axis movement for precise, repeatable cuts.
Cable Feeding Sheaves
Features 
3/3/2011  Post a comment
Can slide into the end of a conduit and rotate to align with the desired cable direction, allowing cable to be fed-in smoothly from any angle.
64-Bit VxWorks RTOS
Features 
3/1/2011  Post a comment
Enables high-performance processing of large data structures.
Dual-Monitor KVM Extender
Features 
3/1/2011  Post a comment
Bus extension technology over fiber-optic cable to drive two high-resolution displays up to 1 KM from the PC.
Single Channel Hi-Speed USB to UART/FIFO Interface IC
Features 
3/1/2011  Post a comment
Can be placed in various serial and parallel I/O configurations, including a proprietary dynamic bi-directional data bus.
WLCSP Socket
Features 
3/1/2011  Post a comment
The SG-BGA-7203 socket is designed for two different WLCSPs to be tested in a single socket side by side.
VersaDrum Piston Pump Bulk Melters
Features 
3/1/2011  2 comments
Consistent primary and secondary seal dispensing for insulated glass.
Whispah Linear Slide
Features 
3/1/2011  Post a comment
Useful for linear motion applications that must be non-contaminating to its environment such as medical equipment.
Multipurpose Actuators
Features 
3/1/2011  Post a comment
Designed to lift dynamic loads ranging from 100 to 1,600 lbs.
Miniature AHRS with Onboard GPS
Features 
3/1/2011  Post a comment
Can independently provide time correlated measurements.
Chemically Resistant Epoxy
Features 
3/1/2011  Post a comment
For applications demanding chemical resistance to acids, fuels and oils.
Motorcycle Monitor
Features 
3/1/2011  1 comment
Accelerometers make it possible to know when a motorcycle is crashing and then fire a jacket airbag before the driver strikes the ground.
<<  <  Page 3/3




Partner Zone
Latest Analysis
Former DARPA official and Google executive Dr. Kaigham Gabriel believes sensor companies think too much like suppliers and need to bring their products closer to the consumer.
One way to keep a Formula One racing team moving at breakneck speed in the pit and at the test facility is to bring CAD drawings of the racing vehicleís parts down to the test facility and even out to the track.
Most of us would just as soon step on a cockroach rather than study it, but thatís just what researchers at UC Berkeley did in the pursuit of building small, nimble robots suitable for disaster-recovery and search-and-rescue missions.
Engineers at Festo were inspired by how a caterpillar builds its cocoon when designing its new 3D Cocooner printer.
Design engineers need to prepare for a future in which their electronic products will use not just one or two, but possibly many user interfaces that involve touch, vision, gestures, and even eye movements.
More:Blogs|News
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course June 28-30:
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service