Sherlock Ohms
Content posted in September 2013
Bad Address Baffles the Software
Sherlock Ohms 
9/26/2013  15 comments
I had to fix a software glitch, and I found the answer to the problem in an offhand story told by my boss.
Heating & AC Units Run Hot & Cold
Sherlock Ohms 
9/25/2013  16 comments
Hooking up the AC on top of the heating wiring proved to be a mess.
No Pressure on the Pressure Gauge
Sherlock Ohms 
9/23/2013  13 comments
The finishing machine had oscillation errors.
Looking for Common Ground
Sherlock Ohms 
9/19/2013  15 comments
It's critical to make sure the ground is doing its job and not destroying equipment.
Sneak Path Snafus Circuit Board
Sherlock Ohms 
9/13/2013  19 comments
A change to the circuit board causes unintended results.
Capacitor Problem? Replace the Contactor
Sherlock Ohms 
9/11/2013  13 comments
When someone tells you what's wrong with your system, it pays to double check to see the real cause of the problem.
The Fuse Holders Wouldn’t Hold
Sherlock Ohms 
9/9/2013  28 comments
The cooling fans on the Lotus suffered when the fuse holders wouldn't hold.
It’s Not Us, Said the Hardware Hacks
Sherlock Ohms 
9/5/2013  15 comments
The hardware team said the problem was not theirs. But they were wrong.

Partner Zone
Latest Analysis
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
At ARM TechCon 2016, CEO Simon Segars will discuss how he sees billions of devices scaling to trillions as IoT applications proliferate. We know it’s happening. How do we prepare?
The term “autopilot” is now at the heart of a growing debate between Tesla Motors Inc. and Germany’s Federal Motor Transport Authority.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service