Sherlock Ohms
Content posted in October 2011
The Case of the Getting Out of Hot Water
Sherlock Ohms 
10/28/2011  5 comments
The hot water was a problem in ramping up a pharma manufacturing process. Call on the inner Sherlock Ohms.
The Case of the Faulty Spring Clutch
Sherlock Ohms 
10/27/2011  4 comments
This problem with faulty springs revealed the problem with conventional-wisdom solutions.
The Case of the Shocking Stall
Sherlock Ohms 
10/19/2011  20 comments
When the car started to stall during right turns, Sherlock made a shocking discovery.
The Case of the Mismarked Resistor
Sherlock Ohms 
10/12/2011  16 comments
Sometime it's the most ridiculous problem that can mess up a prototype -- a tiny, nearly insignificant part.
The Case of the Crazy Antenna
Sherlock Ohms 
10/11/2011  8 comments
When radio communications were patchy, it was time to check the antennas.
The Case of the Stuttering Tape Drive
Sherlock Ohms 
10/5/2011  10 comments
When we moved a tape deck into a different part of our building, we started running into a host of problems with the equipment. Call Sherlock Ohms.
The Case of the Unplugged Orifice
Sherlock Ohms 
10/3/2011  6 comments
The difficulties of an aircraft airflow sensor set up challenges for Sherlock Ohms.

Partner Zone
Latest Analysis
The company says it anticipates high-definition video for home security and other uses will be the next mature technology integrated into the IoT domain, hence the introduction of its MatrixCam devkit.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Check out these gifts that will make you the hero of your Secret Santa party.
Voting has closed on our 2015 Gadget Freak of the Year contest, but it is not game over yet for two competing projects.
Design News Webinar Series
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/29/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
12/2/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Jul 6 - 10, Building Raspberry Pi Controllers with Python
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service