Slideshow: 15 Inventions That Changed Our Lives
Blog 2/28/2014 89 comments While there have been numerous inventions over the last 100 years that have made our lives better in some way, some more than others have significantly changed the way we do things in our everyday lives, and had the ability to change industries and markets. We present 15 of them.
Hospitals Require Efficient, Low-Cost Electrical Power Distribution
Guest Blogs 2/28/2014 1 comment Engineers use efficiency enhancing products in hospitals that help cut down on utility costs and increase the efficiency of power distribution across the board. These installation devices can be high-voltage transformers and other circuits that enable a facility to get continuous power supply.
Simple Programming Fixes
Sherlock Ohms 2/28/2014 12 comments Sherlock Ohms highlights stories told by engineers who have used their deductive reasoning and technical prowess to troubleshoot and solve the most perplexing engineering mysteries.
Autodesk Acquires Delcam
CAD/CAM Corner 2/27/2014 Post a comment Autodesk, a leader in 3D design solutions, announced earlier this month that it has completed its acquisition of Delcam, a leading supplier of CAD/CAM manufacturing software, in its efforts to expand the company’s manufacturing software capabilities.
Simulation Helps Design a Fuel Tank
Guest Blogs 2/27/2014 10 comments When most people think of their car’s fuel tank, it’s a simple thought about keeping it from running dry. For engineers, designing an automotive fuel tank is a complicated (and sometimes costly) endeavor.
Baxter Shows Off His Moves at ATX West
Engineering Materials 2/26/2014 16 comments Baxter showed off his 2.0-derived moves at ATX West this year. The big red guy still looks pretty much the same, but has some new abilities, mostly due to software. The research robot version is now being used in corporate R&D departments as a design platform.
The 'Servitization' of Aircraft Design
Guest Blogs 2/26/2014 7 comments Regardless of how each aircraft manufacturer ultimately measures success, they all grapple with the same basic question: What can we do to optimize our asset's availability for its intended use?
Reshoring, TCO & DFMA
Guest Blogs 2/25/2014 9 comments With labor becoming a smaller part of most companies’ total cost and much of the cost-savings opportunities residing in lean and DFMA manufacturing, why endure the higher costs and negative aspects of offshoring?
US Army Goes Green With Solar Energy
Blog 2/24/2014 62 comments The solar array at Fort Carson, Colo., which is part of the Army's largest microgrid installation, is part of an overall strategy to use solar power to cut costs and for other tactical purposes.
More Rule Changes Coming for 1 to 500 HP Motors
Guest Blogs 2/24/2014 12 comments With the new proposed rule, almost all three-phase motors in three-digit NEMA frames and also enclosed 56-frame (plus IEC equivalents) will need to meet premium efficiency levels per MG 1 table 12-12. This includes NEMA Designs A, B, and C, and IEC Designs N and H.
The Tesla Fires Are Fixable
Automotive News 2/21/2014 58 comments By now, most followers of the electric car market know that another Tesla Model S caught fire in early February. The blaze happened in a homeowner’s garage in Toronto. After parking the car, the owner left his garage. Moments later, the smoke detector blared, the fire department was called, and the car was ruined. To date, no one knows why.
Sabic Brings Carbon Composites to Medical Devices
Engineering Materials 2/21/2014 10 comments Like most medical-grade plastics introduced at this year's MD&M West show, those from Sabic's Innovative Plastics division can withstand multiple sterilization processes and harsh chemical disinfectants. The big difference? Sabic's new compounds are high-modulus carbon-fiber-reinforced thermoplastics.
CAD to Commerce
Guest Blogs 2/21/2014 4 comments The cloud is more than a big computer in the sky. True cloud solutions will change the product development and consumer engagement workflows we know today.
Slideshow: Pickups Roll at Chicago Auto Show
Electronics News 2/20/2014 38 comments The Chicago Auto Show has long been a haven for truck introductions, and this year’s edition was no exception. Chevrolet, Nissan, and Toyota all showed off new trucks, while competitors rolled out concept cars and production vehicles.
Disease-Fighting Materials Spotlighted at MD&M West
Engineering Materials 2/20/2014 22 comments Most of the new materials on display at the MD&M West show in Anaheim, Calif. last week were developed to fight disease, especially the infections that hospital staff and patients are getting in large numbers. Many of the new plastics have also been developed with antimicrobial properties.
Corroded Copper Stops Dial Tone
Sherlock Ohms 2/11/2014 34 comments Sherlock Ohms highlights stories told by engineers who have used their deductive reasoning and technical prowess to troubleshoot and solve the most perplexing engineering mysteries.
Top 7 Skills for Management
Guest Blogs 2/11/2014 18 comments If you can transform yourself into a successful manager, you can heighten the productivity of your company, and thus establish a reputable business presence.
Linear guides are one of the most important components required for the design of automated or computer-controlled equipment. Aluminum profile extrusions, used for these guides, can enable designed-in functional features.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.